Outdoor Kitchen Cabinets in Norcross, GA
Use Norcross Cabinet Supply to ask about outdoor Kitchen Cabinets in Norcross, including available providers and the assessment needed for your room. A patio kitchen in Norcross, GA, fails when the stone surround is built before the cabinet boxes are sized. The mason pours the block, the stone is set, and then the grill cutout is two inches too narrow. For outdoor Kitchen Cabinets in Norcross, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (678) 498-7454. Calls only, we do not receive text messages.
About our outdoor kitchen cabinets
Outdoor kitchen cabinet runs in Gwinnett County are ordered with specific counter overhang and backsplash heights so the countertop fabricator and the mason share the same numbers. The order includes a drainage gap under the base run and a vent panel beside the grill. Call to schedule a dimension lock visit before your site work starts.
Why Norcross Cabinet Supply
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Cutouts before block and stone
The most common failure in an outdoor kitchen is a masonry surround that dictates the cabinet widths after the fact. If the stone is set first, the cabinet boxes must be built to fit the existing stone, which often results in awkward widths, misaligned door hinges, and appliances that do not sit flush. By issuing the appliance cutout schedule before the masonry is built, the cabinet boxes are sized to the appliance, and the masonry is built to accommodate the boxes.
The cutout schedule includes the exact width, depth and height for each appliance opening. A built-in gas grill requires a specific opening width that accounts for the grill body, the control panel clearance and the ventilation space above. A side-burner or refrigerator requires its own dimensions, including the door swing clearance and the electrical or gas connection access. These numbers are provided to the mason before the block is laid, so the openings are built to the cabinet spec rather than the other way around.
For a typical outdoor kitchen run, the cutout schedule is a one-page document that lists each opening by dimension and location. The mason uses this to set the block and stone, and the cabinet fabricator uses it to build the boxes. When both trades work from the same document, the installation is clean and the appliances fit without modification.
Numbers the mason and the top fabricator share
Outdoor cabinets are ordered with a counter overhang and a backsplash height stated in the order so the countertop fabricator and the mason work from the same numbers. The overhang is the distance the countertop extends beyond the cabinet face, and the backsplash height is the distance from the countertop surface to the bottom of the wall cabinet or the top of the masonry. These two numbers must be identical in the cabinet order and the masonry spec.
If the mason builds a backsplash that is two inches higher than the cabinet order expects, the countertop fabricator will cut a template that does not match the cabinet face, resulting in gaps or overhangs that look uneven. By stating the overhang and backsplash height in the cabinet order, the fabricator cuts the countertop to the exact profile that the mason will build. This eliminates the need for on-site adjustments and ensures a clean seam where the countertop meets the masonry.
The order also specifies the countertop material and thickness. Quartz is a common choice for outdoor kitchens because it is non-porous and resistant to staining, but it is brittle and can crack if the cabinet boxes flex. The cabinet order specifies the box construction to support the weight of the stone or quartz, and the masonry spec accounts for the additional load. This coordination happens at the order stage, not on install day.
Drainage, venting and the cabinet order
A drainage gap under the cabinet run and a vent panel beside the grill are part of the cabinet order, not the mason's problem. Outdoor cabinets are exposed to rain, humidity and temperature swings that indoor cabinets are not. Without a drainage gap, water collects at the bottom of the boxes and wicks into the wood, causing swelling, warping and eventual rot. The drainage gap is a small channel at the bottom of the base cabinet that allows water to escape to the ground rather than pooling inside the box.
The vent panel beside the grill is another critical component. Grills generate heat and smoke that must be vented away from the cabinet boxes and the countertop. If the vent is not included in the cabinet order, the mason may build a solid wall beside the grill, trapping heat and damaging the wood or the countertop. The cabinet order specifies the vent panel size, location and material, and the mason builds the opening to match. This ensures that heat is directed upward and away from the cabinet structure.
These details are often overlooked in outdoor kitchen projects because they are not visible in the finished design. But they are the difference between a cabinet run that lasts five years and one that lasts twenty. The cabinet order includes the drainage gap and vent panel as standard line items, and the mason spec is updated to include the corresponding openings. This is a small part of the order that has a large impact on the longevity of the installation.
Outdoor runs for Gwinnett patios and pool decks
Outdoor kitchen cabinets in Gwinnett County are built for the specific conditions of the region. Summers are hot and humid, with frequent afternoon thunderstorms that can soak a patio in minutes. The cabinet boxes are built with materials that resist moisture and temperature changes. The boxes are sealed with a moisture-resistant finish on all interior and exterior surfaces.
Pool decks present a different challenge. The combination of pool water, chlorine and direct sunlight accelerates the degradation of wood and hardware. Outdoor cabinets for pool decks are specified with stainless steel or bronze hardware, and the wood is treated for UV resistance. The cabinet order specifies the hardware finish and the wood treatment, so the mason and the fabricator know what to expect. For the Norcross outdoor counter, request the selected product’s exposure limits, cleaning guidance and warranty exclusions, including pool chemical contact.
Patio kitchens that are covered by a pergola or roof are subject to less direct weather exposure, but they still experience humidity and temperature swings. The cabinet order for a covered patio includes the drainage gap and vent panel, but the box construction can be slightly less aggressive than for an uncovered run. The dimension lock visit determines the exposure level and the appropriate specification for the site.
Outdoor kitchen cabinet cost in Norcross
Outdoor kitchen cabinet cost depends on the length of the run, the number of appliance cutouts, the box construction, the door style and the hardware. The grade ladder for outdoor cabinets is similar to indoor cabinets, but the materials are more expensive because they must withstand weather. Ask how the quoted outdoor Kitchen Cabinets in Norcross option changes with cabinet construction, drawer count, specialty fittings and site preparation; confirm which materials and work are actually included. For outdoor Kitchen Cabinets in Norcross, request an itemized quote showing box sizes, door and drawer choices, fittings, finish and installation scope rather than relying on a general price range.
Within any grade, the choices that move the price are the number of appliance cutouts, the door style, the wood species or painted finish, and the hardware. For an outdoor run, a flat slab front costs less to fabricate than a raised-panel or inset door. Painted MDF is less expensive than stained hardwood, but hardwood is more durable in outdoor conditions. Stainless steel hardware costs more than zinc-plated hardware but lasts longer in a humid environment. The cabinet order itemizes these choices so the cost is known before the masonry begins.
Demolition, disposal, masonry work and countertop fabrication are separate line items. The cabinet order covers the boxes, doors, drawers and hardware, but the mason and the countertop fabricator are separate trades. These figures are estimates for outdoor kitchen cabinets in Norcross, GA, subject to change, and the written quote issued after the dimension lock visit sets the final price.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Outdoor Kitchen Cabinets: Common Questions
Do you issue the cutout schedule before the masonry is built?
Yes. The cutout schedule is issued before the masonry is built. It includes the exact dimensions for each appliance opening, the counter overhang, and the backsplash height. The mason uses this document to set the block and stone, and the cabinet fabricator uses it to build the boxes. This ensures that the masonry and the cabinets fit together without on-site adjustments.
What is included in the cabinet order for an outdoor kitchen?
The cabinet order includes the base boxes, wall boxes, doors, drawers, hardware, the drainage gap, and the vent panel. It also includes the counter overhang and backsplash height so the countertop fabricator can cut the template to match. The order is a complete document that the mason, the fabricator and the cabinet shop all use to build their part of the project.
How do you handle humidity and rain in Gwinnett?
Outdoor cabinets are built with moisture-resistant materials and finishes. The box material and its manufacturer's published moisture rating are confirmed for the exposure level, and sealing and edge treatment are specified in the cabinet order. The hardware is specified in stainless steel or bronze to resist corrosion. The drainage gap under the base run allows water to escape, and the vent panel beside the grill prevents heat buildup. These features are standard in the cabinet order for outdoor runs.
Can you work with our mason and countertop fabricator?
Yes. The cabinet order is shared with the mason and the countertop fabricator so all three trades work from the same numbers. The cutout schedule, the counter overhang and the backsplash height are stated in the order, so there is no ambiguity about what each trade is building. This coordination happens at the order stage, before any site work begins.
How long before outdoor kitchen cabinets arrive?
Ask the selected Norcross supplier for outdoor Kitchen Cabinets in Norcross to distinguish manufacturing, delivery, site preparation and installation stages, and record any dependencies in the project schedule. The lead time depends on the complexity of the run and the current order queue. The written quote includes the estimated lead time so the masonry and countertop work can be scheduled accordingly.
Do you cover Norcross and the surrounding area?
The company works in Norcross and the surrounding Gwinnett County communities. The dimension lock visit is scheduled at the site before the masonry begins. Call to check the current service schedule for your specific location and to book the visit.
Talk to us about outdoor kitchen cabinets
Tell us about the room, in Norcross or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.