Cabinet Refacing in Norcross, GA
Refacing is the Norcross flipper's kitchen scope: new doors and hardware in days, the kitchen functional throughout, the listing date intact.
Free estimate from a local cabinet pro. No obligation.
Get my free estimate
Or call (678) 498-7454. Calls only, we do not receive text messages.
Answered 24/7
Managing a portfolio of rental units in Norcross means dozens of kitchens built from the same 1990s builder-grade oak stock. The boxes may still hold, but the fronts sag, the hinges wobble and the drawer slides stick. Cabinet refacing in Norcross addresses those worn surfaces without tearing out the entire run.
- Free estimate from a local pro
- No obligation to go ahead
- Semi-custom to full custom

About our cabinet refacing
Norcross Cabinet Supply quotes refacing jobs per unit, counting every door and drawer front from a single representative kitchen so the pricing scales cleanly across your portfolio. We swap the hinges and drawer slides in the same pass so every door closes the same. Call to schedule a count and get a free estimate.
Cabinet refacing in Norcross
Norcross flip kitchen refaced and ready before the stager walks in
A Norcross seller or flipper with a listing date cannot afford a kitchen replacement that runs four weeks and leaves the room unusable. Refacing replaces the doors, drawer fronts, and hardware and covers the exposed box faces with a veneer. The kitchen stays in service the entire time. For a home going to market, this scope photographs as current without a full replacement timeline.
- Refacing finishes in days. A full replacement takes weeks and leaves the kitchen unusable.
- For a listing, the goal is a kitchen that photographs clean, not one that is custom-built.
- So you can list on the date that was planned, not the date the replacement project finished.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Reface or replace Norcross cabinets
Reface wins when the Gwinnett face-frame boxes are still plumb and tight
The box check comes before any refacing quote. Square face frames, shelves that hold load without flex, and a dry sink base are the three things that have to be true. If the particle board is swelling at the hinge line or the sink base has soft spots from a slow drip, the scope is a replacement, not a reface. Starting with a door swap on a damaged box wastes the door.
- Water damage under the sink base means new boxes. Refacing over a damaged box is lipstick on a problem.
- Open the cabinet doors and press the sink base. Solid and dry: reface. Soft or loose at the hinge: replace.
- So you can decide reface or replace based on what the boxes are, not what the doors look like.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Cabinet refacing quote in Norcross
Norcross refacing quote: door style, veneer, and hardware each itemized
Refacing quotes cover different scopes depending on the veneer material and whether the cabinet interior is lined. Thermofoil veneer is not the same material or price as real-wood veneer. A quote that says only 'refacing' tells you neither. Ask what material covers the box face, what the door construction is, and what is not in the quote. The free estimate is the right time for that conversation.
- Thermofoil, rigid thermofoil, and real-wood veneer are three different materials at three different price points.
- A refacing quote that does not name the veneer material is a number you cannot compare.
- Will it look cheap? The veneer material and the door construction are the two answers.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Why Norcross Cabinet Supply
How to plan your project
Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Counting one unit, pricing all of them
The first step in a portfolio refacing is a full count of a single representative unit. We record every door front by size, every drawer front by size, and the quantity of each. That count becomes the template for every other unit in the building or across the portfolio. Because the kitchens were built from the same builder-grade stock, the counts repeat, and the quote scales by multiplying the per-item cost by the number of units.
Per-item pricing is the only method that works for a landlord. Quoting by the room or by the linear foot hides the variance between a unit with ten doors and one with fourteen. A per-door and per-drawer-front quote lets you see exactly what a change in door style or finish costs across the whole portfolio before the order is placed.
The written quote itemizes the count for one unit, then shows the total for the full scope. If you add a new unit to the project, the math is a simple multiplication of the per-item rates. There are no hidden per-room premiums or minimums that shift the price when the scope changes.
Doors, hinges and drawer boxes in one pass
The hinge type is changed in the same pass as the fronts. If the existing doors hang on worn cam hinges or the wrong overlay, the new fronts will not close cleanly no matter how well they are built. Compare compatible soft-close hinges and ask whether hardware removal and replacement are included for every door.
Drawer boxes are swapped when the slides are worn. This is the complaint that comes back first after a refacing job that skipped the slides. New drawer fronts on tired undermount slides feel loose and rattle. Have the supplier check drawer-box and slide compatibility and specify the replacement parts and warranty terms in writing.
Door style is selected at the count stage. For rental portfolios, shaker or slab doors in a painted finish are the most common choices because they hide wear and are easy to match across units. Stained wood options like white oak or walnut are available for units where a warmer look is the goal. The hinge and slide specs are locked in with the door choice so the hardware arrives with the fronts and the install runs in a single visit per unit.

Where refacing stops and replacement starts
Refacing works when the box is sound. The moment a box is swollen from water exposure, or a sink base is rotten, refacing stops. Those units get replacement boxes from stock in the same color and finish as the refaced run. The new box matches the surrounding refaced cabinets so the kitchen reads as one continuous unit, not a patchwork of old and new.
The count visit includes a structural check of every box. We tap the sides, check the toe kick for moisture, and inspect the sink base and any box that sits near a drain. Any box that fails that check is flagged on the quote as a replacement rather than a refacing. The replacement box is ordered to the same dimensions and finish, so the visual result matches.
For a landlord, this distinction matters because a refacing quote that includes replacement boxes is still a single line item per unit. The job stays one scope. The quote shows the refaced fronts, the swapped hardware, and the replacement boxes for the damaged units, all in one document with one total price.
Refacing for rental portfolios in Gwinnett
Refacing is the right move for a portfolio in Gwinnett County when the boxes are structurally sound but the finishes are tired. The work is less disruptive than a full replacement. There is no demolition of the boxes, no wall repair, and no countertop re-templating. The units stay in place, the fronts come off, the hardware is swapped, and the new fronts go on. A typical unit can be refaced in a single day, which means the tenant turnover window is not extended by a week of cabinet work.
Scheduling a portfolio refacing is a matter of sequencing the units. We work through the building or the portfolio one unit at a time, so the downtime is contained to a single kitchen at a time. The per-unit count from the first unit is reused for each subsequent unit, so the quote and the install plan are identical across the scope. The written quote covers the full portfolio, and the install schedule is built around your turnover calendar.

Cabinet refacing cost in Norcross
Cabinet refacing cost is driven by the number of doors and drawer fronts, the door style, the finish, and the number of drawer boxes that need to be swapped. A full kitchen refacing in Norcross typically runs roughly $4,500 to $10,500 installed, and that range shifts with the choices made at the count stage.
Within that range, the price moves with the door style. A painted shaker or slab door costs less to produce than a raised panel or an inset door. The finish also matters: a standard painted finish is less expensive than a stained wood or a specialty thermofoil. Drawer boxes with new undermount slides cost more per unit than boxes where the slides are still serviceable, and the quote reflects that difference per drawer.
Hardware is a separate line item. Soft-close hinges and undermount drawer slides are specified per door and per drawer, and the total hardware cost scales with the count. A unit with twelve doors and eight drawers feels the difference between basic and soft-close hardware. For a portfolio, that per-unit hardware cost is multiplied across every unit in the scope.
Replacement boxes for damaged units are quoted at the stock price for that box size and finish. Demolition is minimal because the boxes stay in place, but disposal of the old fronts and old hardware is included in the quote. These figures are estimates for cabinet refacing in Norcross, GA, subject to change, and the written quote after the count visit sets the final price.
The same kitchen, refaced

BeforeAfterThe process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.
Free estimate
A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.
Decide, then order
Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Also from us
Related Services
Kitchen Cabinets
In-Stock Cabinets
Laundry Room Cabinets
Mudroom Lockers and Built-Ins
Custom Kitchen Cabinets
Inset CabinetryFree estimate from a local cabinet pro. No obligation.
Answered 24/7
More cabinet options



Service area
Areas covered by these guides
Questions
Cabinet Refacing: Common Questions
Do you reface doors only, or do you swap the drawer boxes too?
We swap the drawer boxes when the slides are worn. New fronts on tired slides is the complaint that comes back first, so the boxes and the slides are replaced together. If the slides are still in good shape, the boxes stay and only the fronts and hinges are changed. The count visit determines which drawers need new boxes and which can keep the existing ones.
How do you quote a portfolio of identical kitchens?
We count every door and every drawer front in one representative unit, then multiply that count by the number of units in the portfolio. The per-item rates for doors, drawer fronts, hinges, and slides are applied to the total count. The written quote shows the per-unit breakdown and the portfolio total, so you can see exactly what each unit costs and what the full scope costs.
What happens if a box is damaged during the count?
If a box is swollen, rotten, or otherwise structurally compromised, refacing stops for that unit. We order a replacement box from stock in the same color and finish as the refaced run. The replacement box is included in the same quote as the refacing work, so the kitchen reads as one continuous unit after the job is done.
Can you match the refaced fronts to the existing countertop?
Yes. The finish is selected to complement the existing countertop. A painted finish in a neutral tone works with most stone and laminate counters. A stained wood finish can be chosen to match or contrast with the countertop. The finish is confirmed at the count visit, and the written quote reflects the finish choice.
How long does a refacing job take per unit?
A typical unit is refaced in a single day. The old fronts come off, the hardware is swapped, and the new fronts go on. For a portfolio, we sequence the units one at a time so the downtime is contained to one kitchen at a time. The total project timeline depends on the number of units and your turnover schedule.
Do you cover my area in Gwinnett County?
Norcross Cabinet Supply serves Norcross and the surrounding service area in Gwinnett County. The count visit confirms the service area at the time of booking. Call to check the current schedule for your specific neighborhood.
Talk to us about cabinet refacing
Tell us about the room, in Norcross or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Calls only, we do not receive text messages.
