Multifamily Cabinet Packages in Norcross, GA
Use Norcross Cabinet Supply to ask about multifamily Cabinet Packages in Norcross, including available providers and the assessment needed for your room. A property manager in Norcross replacing kitchen cabinets on an occupied apartment building faces a specific problem: how to quote a unit turn without remeasuring every apartment, and how to keep matching doors available for the next turn two years from now. For multifamily Cabinet Packages in Norcross, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (678) 498-7454. Calls only, we do not receive text messages.
About our multifamily and apartment cabinet packages
Confirm the Norcross supplier's for multifamily Cabinet Packages in Norcross current collection or delivery options, applicable charges, location and access arrangements before planning the job. Deliveries are scheduled per building with unit numbers on each box so maintenance staff can stage them in a vacant unit. Call today to get a written quote built from your unit mix.
Why Norcross Cabinet Supply
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Measuring one unit, pricing the mix
The quote process for a multifamily property starts with a single unit. A measurer visits one representative apartment, records the full cabinet run, and documents the door and drawer front count, box sizes, wall cabinet heights, base cabinet widths and any specialty units such as a tall pantry or a range hood cabinet. That one measurement becomes the template for every unit in the same floor plan.
The written quote then scales that template across the building's unit mix. If the property has 40 units across three floor plans, the quote shows the box count and linear feet for each plan, the total for the building, and a per-unit cost. The per-unit figure is what a property manager uses to budget a turn cycle. The building total is what a developer or general contractor uses for a capital project bid.
The unit mix matters because a building with a mix of one-bedroom, two-bedroom and three-bedroom floor plans carries different cabinet loads. A one-bedroom unit might carry 12 linear feet of base and 10 linear feet of wall cabinets. A two-bedroom unit might carry 18 and 14.
Attic stock so later turns match
When the first turn is installed, a small quantity of spare doors, drawer fronts and a few base cabinets is ordered at the same time and stored on site. Request a scope-based schedule for multifamily Cabinet Packages in Norcross, including countertop work, service connections and any return visits rather than assuming a standard duration.
For multifamily Cabinet Packages in Norcross, ask which items the selected supplier actually has available, which require an order and how availability will be confirmed. A 20-unit building with a typical annual turn rate of two to three units might carry eight to ten spare doors and four to six drawer fronts. A 100-unit property might carry 40 to 60 spare doors and 20 to 30 drawer fronts.
Cabinet doors are stained or painted in batches, and even the same wood species and finish specification can vary slightly between production runs. Ordering spares from the same lot as the first turn eliminates the risk of a visible mismatch on a later turn.
Staging deliveries on an occupied property
Delivering cabinets to an occupied apartment building is different from delivering to a single-family home. The property has tenants in most units, a limited staging area, and a maintenance team that works on a shift schedule. The delivery plan is built into the quote and the install schedule.
Each box is labeled with the unit number and the cabinet type. Maintenance staff can stage the boxes in a vacant unit or a loading area without sorting a mixed pallet.
Deliveries are scheduled per building and per unit turn. The install crew arrives on the day the unit is vacant and the tenant has moved out. The boxes are staged in the unit, the old cabinets are removed, and the new run is installed. The written quote includes a per-delivery scheduling fee that covers the labeling, the staging coordination and the delivery window.
Vanities and laundry in the same turn
A unit turn usually includes more than the kitchen. The bathroom vanity and the laundry room cabinets are replaced at the same time to keep the whole unit consistent. The quote covers all three rooms as a single turn package with a single delivery and a single install visit.
Bathroom vanities are typically a single base cabinet with an integrated or separate sink, a countertop and a wall cabinet or medicine cabinet. The quote itemizes the vanity box, the door and drawer fronts, the countertop and the hardware. The same door style and finish used in the kitchen is carried through to the vanity and laundry so the unit reads as one finished space.
The turn package is priced as a single unit cost that covers all three rooms. The property manager can see the kitchen cost, the bathroom cost and the laundry cost as separate line items, but the total is one figure per unit. The delivery and install are scheduled as one visit, so the unit is out of service for a single block of time rather than three separate visits.
Multifamily cabinet package cost in Norcross
Request a current list of available multifamily Cabinet Packages in Norcross sizes, finishes and hardware options, and verify the chosen products before reserving an installation date. For multifamily Cabinet Packages in Norcross, request an itemized quote showing box sizes, door and drawer choices, fittings, finish and installation scope rather than relying on a general price range. Compare the Norcross proposal for multifamily Cabinet Packages in Norcross by scope: retained components, new boxes, hardware, delivery, removal and any separate trade work should be identified before you judge the total.
Within any grade, the choices that move the per-unit price are door style, a slab door costs less to build than a raised panel or inset, box material, the box and fastening specification being confirmed against the manufacturer's published moisture rating, drawer count versus door count, a drawer base costs more than a door base of the same width, and specialty units such as a tall pantry or a range hood cabinet. Hardware choices also move the total. On unit-turn packages, semi-custom and custom grades include soft-close hinges and undermount drawer slides in the base specification.
Demolition, disposal, wall repairs, countertop work and delivery staging are separate line items. These are estimates for multifamily cabinet packages in Norcross, GA, subject to change, and the written quote after the field measure sets the final price for each turn cycle.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Multifamily and Apartment Cabinet Packages: Common Questions
Do you remeasure every unit or just one?
Confirm who will handle the proposed Norcross work for multifamily Cabinet Packages in Norcross, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor. If a specific unit has a non-standard wall condition, a window, or a plumbing offset that differs from the template, the measurer documents that variation and the quote adjusts the box count for that unit only. The written quote shows the template unit and any unit-specific adjustments as separate line items.
How much attic stock should we order?
The quantity depends on the building size and the expected annual turn rate. A general planning range is one spare door and drawer front for every four to five units in the building, plus two to three spare base cabinets for the most common base size. Request a current list of available multifamily Cabinet Packages in Norcross sizes, finishes and hardware options, and verify the chosen products before reserving an installation date. The property manager can adjust the quantity up or down before the order is placed.
Can we use the same package for a new construction project?
Yes. The same unit-turn package structure works for new construction where the developer wants a standard cabinet package repeated across all units in a building. For multifamily Cabinet Packages in Norcross, ask which items the selected supplier actually has available, which require an order and how availability will be confirmed. Confirm the Norcross supplier's for multifamily Cabinet Packages in Norcross current collection or delivery options, applicable charges, location and access arrangements before planning the job.
What does the written quote include?
Request a current list of available multifamily Cabinet Packages in Norcross sizes, finishes and hardware options, and verify the chosen products before reserving an installation date. The per-unit cost and the building total are shown separately. The quote is valid for a stated period and the written quote sets the final price.
Do you cover Norcross and surrounding Gwinnett County properties?
For multifamily Cabinet Packages in Norcross, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope. The design visit and the first turn are scheduled in the service area. For a property outside the current service schedule, call to check availability before the first unit is measured.
How long is the lead time for a multifamily package?
The lead time depends on the grade. Ask the selected Norcross supplier for multifamily Cabinet Packages in Norcross to distinguish manufacturing, delivery, site preparation and installation stages, and record any dependencies in the project schedule. Custom lines run roughly eight to sixteen weeks. The written quote confirms the lead time with the supplier before the order is placed so the property manager can schedule the turn around the delivery date. Request a current list of available multifamily Cabinet Packages in Norcross sizes, finishes and hardware options, and verify the chosen products before reserving an installation date.
Talk to us about multifamily and apartment cabinet packages
Tell us about the room, in Norcross or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.