Bathroom Cabinets in Norcross, GA
A Norcross vanity swap finishes what the kitchen refacing started: same raised-panel oak era, same buyer question about why the primary bath still looks like the 1980s.
Free estimate from a local cabinet pro. No obligation.
Get my free estimate
Or call (678) 498-7454. Calls only, we do not receive text messages.
Answered 24/7
When you manage several bathrooms, mixing vanity sizes, top widths, and faucet hole spacing creates a maintenance nightmare. Every new faucet, every replacement top, and every plumbing repair becomes a custom hunt. Bathroom cabinets in Norcross can be specified as a single SKU with a standardized top and rough-in, so your plumber installs the same way in every room and you keep a spare on the shelf. For a quantity order, confirm the supplier's accepted quantities and the installer's agreed capacity and sequence.
- Free estimate from a local pro
- No obligation to go ahead
- Semi-custom to full custom

About our bathroom cabinets and vanities
Standardization holds down portfolio costs and resists tenant wear. We specify vanities with solid-surface tops and drawer bases to prevent the early failures that are common in rentals. We also order matching linen towers in the same finish lot to ensure every bathroom looks identical. Call to discuss your bathroom count and layout.
Bathroom cabinets in Norcross
A Norcross bathroom vanity update that closes the gap with the kitchen
After a kitchen update, a bathroom vanity that still carries its original raised-panel oak doors and worn hardware reads as the room that was skipped. For a Norcross home going to market, that gap matters to buyers. A vanity door in the same profile and finish as the new kitchen doors closes the visual gap without a full bathroom renovation.
- The bathroom vanity and the kitchen cabinet door profile do not have to match exactly, but they should not read as two different decades.
- Updating the vanity door and hardware is faster and less disruptive than replacing the whole vanity.
- So you can have a bathroom that reads as part of the same home as the updated kitchen.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Bathroom cabinet vanity in Norcross primary bath
Double-sink vanity sized for the Norcross primary bath
Many Norcross primary baths from the 1980s and 1990s have a double-sink vanity that runs wall to wall with an open knee space at the center. That knee space is unused storage. A drawer bank in the center holds what both sides of the vanity need to reach and uses wall space that was already there.
- The knee space in the center of a double-sink vanity is wasted storage if it is left open.
- A drawer bank in the center holds what both sides of the vanity need to reach.
- So you can stop moving things off the counter every morning because there is nowhere else to put them.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Bathroom cabinet quote in Norcross
A vanity estimate that names what the project includes and leaves out
A bathroom vanity quote needs to state whether the countertop and plumbing are in scope. A countertop change turns a vanity cabinet swap into a longer project at a different cost. For a flipper pricing a bathroom update against a resale budget, the distinction matters before the project starts. The free estimate should name every component.
- Countertop and plumbing are the two variables that turn a vanity swap into a bathroom renovation.
- Will it look cheap? The finish and the countertop material are the two answers to that question.
- So you can decide whether to include the countertop with a number in front of you.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Why Norcross Cabinet Supply
How to plan your project
Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
One SKU, one top, one rough-in
The core of a standardized bathroom cabinet program is the decision to use one vanity width for every room. Instead of a 30-inch vanity in the master bath, a 24-inch in the hall bath, and a 36-inch in the guest bath, you specify a single width, such as 30 inches or 36 inches, that fits the smallest room in your building. This single SKU simplifies the order, the delivery, and the long-term maintenance.
With one width, the countertop size is also fixed. A single top dimension means you can buy a replacement top from any supplier without matching a unique cut. More importantly, the faucet hole spacing is consistent. If every vanity uses a single-hole faucet or a standard 8-inch centerset faucet, the plumber roughs in the water supply lines and drain the same way in every room. This eliminates the need for a custom faucet or a wall-hung sink in some rooms and a drop-in in others.
Keeping a spare unit on the shelf is a practical advantage of this approach. If a tenant damages a vanity or a top cracks, you have a matching replacement ready to install. You do not need to wait for a custom order or hunt for a discontinued model. The spare uses the same plumbing rough-in, so the installation is a simple swap rather than a reconfiguration.
What fails first in a rental bath
Rental bathrooms experience heavy use, and certain cabinet configurations fail faster than others. The most common early failure is a door-only base that has a drop-in sink. Over time, the weight of the sink and the water damage from leaks cause the door hinges to sag and the door to warp. The door stops closing, and the leak spreads to the box below.
The solution is a drawer base with a solid-surface top. A drawer base distributes the weight of the sink more evenly and is easier to inspect for water damage. If a leak occurs, you can open the drawer and wipe it out. A door-only base hides the damage until it is severe. Solid-surface tops, such as cultured marble or engineered quartz, are more resistant to cracking and chipping than ceramic or glass. They also do not require a specific faucet hole pattern, which supports the standardization goal.
We specify frameless construction for rental bathrooms. Frameless boxes are lighter and have a cleaner look, but more importantly, they are easier to replace if one is damaged. A framed box that is damaged often requires replacing the entire face frame, while a frameless box can be swapped out more easily. The interior of a frameless box is typically plywood, which holds screws better in humid environments than particleboard.

Linen towers and medicine cabinets in the same lot
A complete bathroom standardization includes the tall units. A linen tower or a tall storage cabinet is a common add-on to a vanity. If you order the vanities and the linen towers in the same production lot, the finish matches exactly. This is critical for a professional look. A slight color difference between a vanity and a linen tower from different production runs is noticeable, especially in a hallway or a shared space.
Medicine cabinets are another component that should be standardized. Instead of mixing open shelves, framed mirrors, and frameless mirrors, you can specify a single medicine cabinet style for all bathrooms. This keeps the wall space consistent and makes it easier to replace a damaged unit. The medicine cabinet can be ordered with the vanities so that the finish lot is the same, ensuring that the hardware and the paint or stain match.
Ordering these components together also simplifies the installation schedule. The installer can mount the vanities, the linen towers, and the medicine cabinets in a single visit. This reduces the number of trips to the site and the labor cost. The plumber can also rough in the plumbing for the vanities and the electrical for the medicine cabinet lights in the same pass.
Bathroom cabinet cost in Norcross
The cost of bathroom cabinets in Norcross depends on the grade of the cabinet, the size of the vanity, and the top material. The grade ladder includes stock, semi-custom, and custom lines. Stock vanities are the most affordable, but they offer limited size options. Semi-custom vanities allow for standard sizes in a wider range of finishes. Custom vanities are built to exact specifications and are the most expensive.
For a standardized rental program, semi-custom vanities are often the best value. They offer the durability of plywood boxes and the finish options needed to match a design, without the high cost of custom work. A typical semi-custom vanity with a solid-surface top runs roughly $800 to $1,500 per unit installed. A custom vanity with a wood top and specialty hardware runs roughly $1,500 to $3,000 per unit installed. These are estimates, subject to change, and the written quote sets the final price.
The number of bathrooms in your project is the main factor that moves the total cost. A single bathroom replacement is a smaller project, but a ten-bathroom building is a large order. Quantity discounts are available for orders of five or more vanities. The cost per unit decreases as the quantity increases, which makes standardization more affordable for larger portfolios. Labor costs are also lower when the installer is repeating the same installation in multiple rooms.
Vanity orders for houses and buildings in Gwinnett
Norcross Cabinet Supply serves Norcross and the surrounding areas in Gwinnett County. This includes single-family homes, townhomes, and multi-unit apartment buildings. The process for a quantity order is different from a single-home replacement. We start with a walkthrough of the property to measure every bathroom and confirm the standard size that fits all of them. We then create a single order for all the vanities, tops, and accessories.
The delivery is scheduled for a single date when all the units arrive at the site. The installation is then scheduled for the following days, with the team moving from one bathroom to the next. This sequenced approach keeps the project on schedule and minimizes disruption to tenants or residents. Agree unit access with the property manager and identify who is responsible for wall repairs and plumbing adjustments.
For properties with a mix of bathroom sizes, we can still standardize by using a modular approach. For example, a 30-inch vanity can be used in a small hall bath, and a 36-inch vanity can be used in a master bath, as long as the top size and faucet spacing are the same. This allows for some flexibility in layout while maintaining the standardization benefits of a single SKU. The key is to keep the top and plumbing consistent, even if the box width varies slightly.

The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.
Free estimate
A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.
Decide, then order
Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Also from us
Related Services
Custom Walk-In Closet Cabinetry
Laundry Room Cabinets
Wet Bar and Butler's Pantry Cabinets
Outdoor Kitchen Cabinets
Kitchen Cabinets
Semi-Custom Kitchen CabinetsFree estimate from a local cabinet pro. No obligation.
Answered 24/7
More cabinet options



Service area
Areas covered by these guides
Questions
Bathroom Cabinets and Vanities: Common Questions
Can I use the same vanity size in bathrooms with different wall lengths?
Yes, if the wall lengths are similar. If one bathroom has a significantly shorter wall, we can use a smaller vanity, but we will keep the top size and faucet spacing the same. This allows the plumber to use the same rough-in for both. If the wall length difference is too large to use the same top size, we may recommend a different approach for that specific bathroom.
What is the lead time for a quantity order of vanities?
Lead time depends on the grade of the vanity. Semi-custom vanities typically have a lead time of four to eight weeks. Custom vanities have a lead time of eight to sixteen weeks. For a quantity order, we confirm the lead time with the supplier before placing the order. Ask whether all units can be delivered together to streamline the installation.
Do you install the vanities or do I need a separate contractor?
Confirm vanity installation availability and plumbing responsibilities directly with the responsible trades. Our team handles the removal of the old vanities, the installation of the new units, and the connection to the existing plumbing. We also install the countertop if it is part of the order. Identify the qualified plumbing and electrical trades and confirm who coordinates their work with the cabinet installation.
What happens if a tenant damages a vanity?
If you have a spare unit on the shelf, we can install it as a replacement. The spare uses the same plumbing rough-in, so the installation is a simple swap. If you do not have a spare, we can order a replacement unit. The lead time for a replacement depends on the grade of the vanity and the availability of the specific finish.
Can I change the finish of the vanities if I have a quantity order?
One quantity order carries one finish, so every vanity comes from a matching lot. If you want a different finish in some bathrooms, place a separate order for those units. This may result in a slight color difference, so we recommend keeping the finish consistent for a professional look.
Talk to us about bathroom cabinets and vanities
Tell us about the room, in Norcross or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Calls only, we do not receive text messages.
