Skip to content
Norcross Cabinet Supply

Kitchen Cabinets in Norcross, GA

Gwinnett investors reading the resale math on a Norcross kitchen find the same thing: the face-frame boxes often pass, and it is the door profile and hardware showing the age.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Get my free estimate

Free estimate from a local cabinet pro. No obligation.

By submitting you agree to be contacted about your project.

Or call (678) 498-7454. Calls only, we do not receive text messages.

Call (678) 498-7454

Answered 24/7

A flip kitchen quote is a price on a complete box list, a stocked color, and a delivery date that holds your closing or listing schedule. Have the supplier check the box list against wall measurements and confirm the damage-replacement process rather than assuming replacement stock will be available. Call to get a free estimate.

  • Free estimate from a local pro
  • No obligation to go ahead
  • Semi-custom to full custom
White shaker cabinets with black pulls, a grey island, speckled counters, a farmhouse sink, and subway tile.

About our kitchen cabinets

A flip kitchen is laid out in stock widths so fillers and panels, not custom boxes, absorb the odd inches. The order is written with counts per size, and a photo of the old kitchen plus wall lengths is enough to begin. For a Norcross or Gwinnett project, confirm the provider's service area and obtain accepted pricing, delivery and installation dates in writing.

Kitchen cabinets in Norcross

New doors and hardware on Norcross boxes that still pass inspection

Kitchen cabinets installed in Norcross from the 1970s through the 1990s used face-frame construction with solid wood frames and, in many cases, plywood box sides. Those boxes have lasted three to four decades and many are still level and dry. For a flipper or a seller, the question is not whether to replace the kitchen. It is whether the boxes are worth keeping.

  • A box that is still square, plumb, and dry is a box worth keeping.
  • The doors and hardware are what every visitor sees. The box is what holds the door.
  • So you can look at a kitchen that reads as current without paying for boxes that are already solid.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 498-7454

Answered 24/7

Kitchen cabinet update in Norcross

Painted shaker doors and new hardware on the existing Norcross boxes

Swapping out raised-panel oak for painted shaker and fitting soft-close hinges and drawer glides changes the kitchen at every visible surface without moving the plumbing or the countertop. The kitchen stays functional throughout. For a Norcross flipper preparing a resale or a homeowner going to market, this scope finishes in days and photographs as a current kitchen.

  • Soft-close hinges and drawer glides are a hardware change, not a cabinet replacement.
  • A painted shaker door on a solid oak frame reads as current. A refinished raised-panel door does not.
  • So you can update the kitchen before the listing without a four-week project.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 498-7454

Answered 24/7

Kitchen cabinet estimate in Norcross

A Norcross kitchen quote broken down by box count, door spec, and pull

A kitchen cabinet estimate should name the box, the door, the hardware, and the install as separate lines. A single total cannot be checked, compared to a competing bid, or adjusted when one part of the scope changes. For an investor with a resale budget, a line-item quote is the tool that keeps the project on budget. The free estimate puts the first number on paper.

  • Is this quote fair? You can only answer that if you can see what each part costs.
  • The door style and the box material are two separate decisions with two separate prices.
  • A quote without line items gives you a number, not an answer.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 498-7454

Answered 24/7

Why Norcross Cabinet Supply

How to plan your project

Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.

FreeAn estimate from a local cabinet pro, with no obligation
Line by lineAsk for every cabinet to be listed in the estimate, so changes stay simple
4 to 16 wksTypical lead time, semi-custom to custom; ask for yours at the estimate
LevelledBoxes shimmed, scribed and checked before the doors go on
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 498-7454

Answered 24/7

Laying out a kitchen in stock widths

A flip or rental kitchen is laid out in standard stock widths so the run fits the room without custom boxes. Common base widths are 12, 15, 24, 30, 36 and 42 inches, and wall cabinets follow the same grid. When a wall is not a clean multiple of those widths, the odd inches are absorbed by fillers and filler panels, not by ordering a non-standard box. A 34-inch gap between a 30-inch base and a 36-inch base is closed with a 4-inch filler, which is a stocked item and costs far less than a custom 34-inch box.

This approach keeps the layout flexible. If the buyer of the finished unit prefers a different appliance width or a different sink location, the filler can be swapped without reordering a custom cabinet. The layout is drawn to scale from the floor plan, and every box is assigned a standard width before the order is written.

From a plan and a photo to a box list

Starting a quote for a kitchen that is not your own does not require a full estimate appointment. A floor plan with wall lengths, a photo of the existing kitchen, and the dimensions of the appliances that will stay or be replaced are enough to begin. Turn the approved plan and wall measurements into a cabinet list showing each size and quantity, then have the supplier confirm it before accepting the order. A 30-inch base with a sink cutout is one line, a 24-inch base with a double-door configuration is another, and a 12-inch filler is a third. The list is the unit of the order.

The box list is what makes the price stable. When the layout is written as counts per standard size, a change to the plan is a change to a count, not a change to a custom order. If the buyer wants the sink moved from the 30-inch base to the 24-inch base, the box list updates and the price adjusts by the difference in those two stocked items. There is no factory re-quote, no new mold, no new lead time. The written quote itemizes every box by size and type, so the flipper knows exactly what is in the order and what each change costs.

White shaker kitchen with brass pulls, a white island with two grey stools, and two brass pendants.

Stocked colors and the damaged-box problem

A stocked door and color means the boxes and door fronts are available on the shelf. If a box arrives with a damaged corner, a cracked door, or a warped face frame, the replacement comes from the stocked inventory, not from a factory order. For a flip, that distinction matters because the install date is fixed by the listing or closing schedule. A factory reorder for a single damaged box can add weeks, and a week of delay can push a closing or a listing date. The stocked door and color are selected at the quote stage so the replacement path is known before the install.

Stocked finishes are typically painted or thermofoil options covering a range of neutrals and common wood tones. For a rental or a flip, the finish choice is driven by resale appeal and durability, not by a specific design vision. A painted maple or a neutral painted finish in a stocked color gives the kitchen a clean, updated look without the lead time of a custom stain or a custom paint. The door style is usually a slab or a shaker, both stocked in standard widths and standard finishes.

Because the boxes are stocked, the inspection on install day is straightforward. Each box is checked for damage before it is set. A damaged box is set aside and replaced from stock rather than reordered from a factory, so the install does not stall.

Kitchen cabinet cost for flips and rentals

Kitchen cabinet cost for a flip or rental is driven by the grade of cabinet, the number of linear feet in the run, and the stocked finish. In-stock boxes at standard widths sit at the low end of the grade range. For a rental or flip in Gwinnett, semi-custom cabinets run about $150 to $700 per linear foot installed, while a fully custom specification pushes the range to roughly $500 to $1,200 per linear foot. A complete kitchen swap in a Norcross flip property, from in-stock to full custom, typically falls in the range of roughly $10,000 to $60,000 installed. For a flip, the in-stock or semi-custom stocked option is usually the right call because the lead time is short and the price is predictable.

Within the stocked option, the choices that move the price are the number of boxes, the door style, the finish, and the interior fittings. A slab door costs less to build than a raised panel or an inset. A plywood box costs more than a particleboard box but holds fasteners better in the humidity of a Georgia summer. Drawers cost more than doors of the same width, so a kitchen with more drawer bases than door bases will price higher. Specialty units such as a tall pantry, a range hood cabinet, or a glass door insert add to the total. Hardware such as soft-close hinges and undermount drawer slides is specified at the quote stage and included in the box list.

Demolition, disposal, wall repairs, and countertop work are separate line items. The written quote itemizes every box by size and type, every filler, every door, every drawer, and every hardware piece. These figures are estimates for kitchen cabinets in Norcross, GA, subject to change, and the written quote you agree sets the final price.

Kitchens for flips and rentals across Gwinnett

Norcross Cabinet Supply serves Norcross and the surrounding Gwinnett County service area, including the neighborhoods where teardown and flip activity is common. The stocked-color, stock-width approach is designed for the pace of a flip or a rental turnover, where the kitchen needs to look updated and function reliably without a multi-week custom lead time. The delivery timeline is confirmed with the supplier before the order is placed.

For a landlord managing multiple units, the box list format means each unit can be quoted and ordered independently. The stocked finish and standard widths keep the price consistent across units. A damaged box in one unit does not affect the order for the next unit. The stocked inventory absorbs the variability that comes with turning multiple properties. The delivery and install schedule is coordinated across units so the crew can work through the portfolio in sequence.

Sage green shaker cabinets with a microwave niche and an open tall cabinet showing shelves beside a herringbone backsplash.

The process

From first call to installed cabinets

Four steps, and you make a decision at the end of each one before the next begins.

  1. Call or send the form

    Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.

  2. Free estimate

    A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.

  3. Decide, then order

    Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.

  4. Delivery and install

    Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 498-7454

Answered 24/7

More cabinet options

Apartment kitchen with grey shaker cabinets, white quartz counters, stainless appliances, and wrapped cabinet boxes stacked in the hall.Corridor of a new building with open doorways showing identical white shaker kitchenettes over paper-covered floors.White shaker cabinets set in a new kitchen with plywood subtops, a drill and level, and primed walls.

Questions

Kitchen Cabinets: Common Questions

Can I get an estimate from a floor plan and a photo?

Yes. A floor plan with wall lengths, a photo of the existing kitchen, and the dimensions of the appliances are enough to start the box list. Norcross Cabinet Supply writes the order as counts per standard size, and the stocked color and door style are selected from the available options. If the plan is incomplete, a short measure of the wall lengths may be needed, but the estimate can often begin from the documents alone.

What happens if a box is damaged on install day?

Because the door and color are stocked, a damaged box is replaced from the shelf, not reordered from a factory. Ask how quickly a stocked replacement can arrive, so the install schedule holds. The stocked finish means the replacement matches the existing doors exactly, with no shade mismatch.

Do you use custom boxes for a flip kitchen?

A flip kitchen uses standard stock widths, not custom boxes, so fillers and panels absorb the odd inches. Custom boxes add lead time and cost that a time-constrained flip does not need. The stock width that fits the wall is chosen, the fillers are calculated, and the layout is locked.

What is the typical lead time for a stocked kitchen?

Stocked boxes and stocked finishes are available on the shelf, so the lead time is short. Semi-custom lines run four to eight weeks, and custom orders run eight to sixteen weeks. For a flip, the stocked option is selected specifically to keep the lead time short and the install date fixed by the listing or closing schedule.

Do you cover the area where my unit is located?

Norcross Cabinet Supply serves Norcross and the surrounding Gwinnett County service area. Call to check the current delivery and install schedule for your specific neighborhood.

What should a flip kitchen quote include?

The written quote itemizes every box by size and type, every filler, every door, every drawer, every hardware piece, and every specialty unit. Demolition, disposal, wall repairs, and countertop work are separate line items. Every cost figure in a flip kitchen quote is a working estimate; the written quote, itemized by box, is the number the order is placed against.

Can I change the layout after the quote is written?

Yes. Because the order is written as a box list with counts per standard size, changing the layout means adjusting the counts. The price updates by the difference in the stocked items, and there is no factory re-quote or new lead time. The written quote reflects the final layout at the time of order.

Free estimate

Talk to us about kitchen cabinets

Tell us about the room, in Norcross or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (678) 498-7454

Answered 24/7

Calls only, we do not receive text messages.

Call (678) 498-7454